High-end service, repairs, modifications, conversions and finishing for electric guitars, acoustic guitars and basses – in my workshop in Kaiserstuhl. Since 2015 my arsenal of tools, machines and jigs has kept growing, and with it the range of work I can offer.
I always tailor the solution to you, your instrument and your budget. The prices shown are average guide prices and can vary depending on the instrument and effort. Quotes can be prepared for individual needs.
Exclusive service and warranty partner in Switzerland for Yamaha, Hagström, FGN, Rickenbacker, Spector, Cort, Lava Music, Takamine, Lanikai and Kohala. See all partners
Good to know
- Drop-off also in Bern and Lucerne – no need to travel to Kaiserstuhl. Drop-off points
- 20 years of experience in the guitar business
- Free care tips for your instrument
- Flexible appointments instead of fixed opening hours. Since I live in the same building, visits outside normal business hours are possible too. Get in touch to arrange your appointment. You are especially welcome on Mondays and Fridays from 5 pm, when our bar at the GTM Club & Store is open as well.
- Individual quotes – also for insurance cases. The first quarter of an hour is free of obligation; extensive quotes are charged.
- For extensive repairs a project discount is possible. A little more patience pays off.
Drop-off points
Kaiserstuhl too far? Leave your instrument closer to home.
You don’t have to travel to Kaiserstuhl for a service or repair: take your instrument to a drop-off point in Bern or Lucerne and collect it there when it’s done. For several guitars we organise a courier trip.
- Bern (Lyss)ID-SYSTEMS AG
- LucerneMusik Hug Kriens
- Kaiserstuhl AGGTM
- Courier tripfor several instruments
Service & setup
Boutique setup
Neck relief, nut, bridge and pickups adjusted to 0.002 inch – plus perfect intonation right up to the last fret, set up for you.
How well a guitar plays depends on its setup. I adjust your instrument precisely to you – afterwards it plays like butter and sounds clean.
Around 80 % of newly bought instruments can still be improved massively. Especially guitars bought online often arrive unchecked and sometimes barely playable. A setup assessment at GTM is free of obligation.
Action options
- Extra low («Flitzefinger»): E6 4/64″ – e1 3/64″
- GTM standard: E6 to e1 4/64″
- Medium: E6 5/64″ – e1 4/64″
- Western: E6 6/64″ – e1 4/64″
More details
A textbook setup requires a special approach and a lot of experience. The frets and fretboard need to be in perfect condition – otherwise fretwork helps.
For instruments that are not new, I recommend the standard service straight away: the boutique setup is included.
Guide prices
- Classical guitar approx. CHF 50.–
- Acoustic (western) guitar approx. CHF 70.–
- Electric guitar approx. CHF 95.–
- Electric guitar with Floyd Rose or similar approx. CHF 80–220.–




Standard service
Cleaning, care, new strings and boutique setup.
The standard service includes all the love an intact instrument needs to be fully playable again – including the boutique setup.
Guitar servicing has been one of my favourite jobs since 2007. The process is so well practised that I can offer it at a very fair price. If any defects show up, I discuss the options with you before going any further.
Included in the service
- Polish frets, clean the fretboard and oil it if needed
- Thoroughly clean body, neck, headstock and hardware
- Check and tighten all screws and nuts
- Check and clean the electronics
- New strings incl. 3 rounds of stretching
- Boutique setup and function check
Guide prices
- Classical guitar approx. CHF 95.–
- Acoustic (western) guitar approx. CHF 100.–
- Electric guitar approx. CHF 135.–
- Electric guitar with Floyd Rose or similar approx. CHF 140–280.–




Service PLUS for nitro finishes
For Gibson, Martin & co.: fully disassembled, finish and hardware cleaned and polished separately.
Your nitro-finished guitar has milky marks you can no longer get out? The Service PLUS is the standard service including complete removal of electronics and hardware. Nitro finish and hardware are cleaned and polished separately – even seemingly hopeless cases shine again.
More details
Polishing wheels for finishes must never touch metal: residue could get caught and scratch the finish afterwards. That is why the hardware is removed completely.
To keep the shine, the instrument needs regular care afterwards. How that works is explained in the care tips.
Guide prices
- Acoustic (western) guitar approx. CHF 350.–
- Electric guitar approx. CHF 450.–




Repairs
Cracks & breaks
Broken headstock or cracked top: glued cleanly – on request with touched-up finish, or even invisibly refinished.
Especially in winter, when indoor air is far too dry, cracks and breaks often happen without much force. The good news: a correctly glued break usually holds better than the wood itself.
With finish work (refinishing, spot repair, touch-ups) the repair can be hidden or made completely invisible.
More details
The more time goes into preparation, the more seamlessly the pieces fit back together. For awkward areas such as the transition from neck to headstock, I make custom clamping blocks so the parts are held together precisely and firmly while gluing.
Before gluing, I do at least one dry run for every break – for complicated breaks, many of them.
Guide prices
- Glue a cracked top approx. CHF 80.–
- Glue a broken headstock approx. CHF 85–160.–
- Refinish broken headstock, satin approx. CHF 270.–
- Refinish broken headstock, high gloss approx. CHF 650.–
- Gibson headstock break with new overlay, invisible approx. CHF 1100.–




Bridge reset
Bridge lifting or tilting? Re-glued on acoustic guitars, reset on electric guitars.
Acoustic guitar: Usually the wrong climate is the cause. Humid air makes the top swell («belly»), dry air flattens it again – the stiffer bridge cannot follow this movement and eventually tears off below the glue joint. In most cases it has to be removed, the glue surfaces matched again and re-glued. Only rarely is re-gluing enough.
Electric guitar: With two-point bridges, especially Floyd Rose and similar systems, the wood around the screws gives way to the string tension and the bridge tilts towards the neck. The threaded inserts are removed, the holes drilled out, filled and reset – ideally a small finish job hides the work.
Guide prices
- Acoustic: re-glue bridge approx. CHF 140.–
- Acoustic: remove and re-glue bridge approx. CHF 300.–
- Acoustic: reduce belly of the top on request
- Electric: bridge reset without touch-up from approx. CHF 180.–
- Electric: bridge reset with touch-up from approx. CHF 300.–




Neck heating
A neck heater (a «hair straightener» for guitar necks) is an almost antique tool from classical guitar making, where no truss rods are used. Heat is used to glue the fretboard again, as it were, in a perfectly straight position.
Classical neck heaters are, however, very hard to come by and only usable to a limited extent.
Together with Mösch AG I developed my own system: the radius of the heating element adapts to the fretboard, and the temperatures of tool and instrument or glue joint can be monitored, regulated and limited precisely. The GTM neck heater passed its test phase quickly and successfully – and I have since built a version for basses too.
Guide prices
- First pass approx. CHF 140.–
- Each further pass approx. CHF 70.–




Fretwork
The frets are the heart of good playability. Buzzing, dead notes, sharp fret ends: levelling, dressing or a refret.
Over time frets wear down, creating flat spots and grooves. Dry air makes frets stick out at the sides or lift out of their slots. The result: buzzing and, in the worst case, dead notes.
A refret solves almost all of these problems but is the most complex job. Often a fret levelling is enough – and for three to five problem frets, the affordable GTM mini fret job.
Since almost every step can be done with different effort, finish and function, the price range is particularly wide here. I am happy to explain it to you in person, on the phone or in the workshop.
Fretwork at a glance
- Refret: new frets
- Fret levelling
- Fret dressing: deburring protruding fret ends
- Gluing frets
- GTM mini fret job: glue and individually level 3 to max. 5 frets
Guide prices
- GTM mini fret job approx. CHF 100.–
- Fret dressing approx. CHF 70–150.–
- Analysis of frets & fretboard (credited) approx. CHF 65.–
- Fret levelling approx. CHF 250.– + material
- Refret standard approx. CHF 450–750.– + material
- Refret with binding approx. CHF 550–850.– + material
- Refret with refinishing approx. CHF 550–1000.– + material




Electronics & pickups
Electronics
Jacks, pots, complete wiring and conversions.
Scratchy pots, a loose jack, a pickup that has given up: I take care of almost all electronic work on guitars and basses. For special cases I have contacts to other specialists.
One of my specialities is converting to EMG active pickups – on request with a separately accessible battery compartment (see routing). The EMG pickups I find most interesting are always in stock.
With unclear electrical faults, troubleshooting is often the most time-consuming part.
Guide prices
- Replace jack (jack approx. CHF 6–40.–) approx. CHF 20–70.–
- Replace pot (pot approx. CHF 5–40.–) approx. CHF 20–45.–
- Replace pickup approx. CHF 30–75.–
- Complete wiring approx. CHF 150–300.–
Charged by effort – depending on parts, model, existing wiring and troubleshooting. Extensive quotes are charged.




Acoustic guitar pickup installation
Natural sound on stage: L.R. Baggs Anthem & co. Installing and optimising piezo pickup systems in acoustic guitars is one of GTM’s specialities – several hundred hours of self-study and now a success rate of 95 %.
An acoustic guitar’s sound only unfolds in the room – a microphone captures it best. On stage that is often impractical. Piezo, magnetic pickup and internal microphone never quite sound like the guitar on their own, but combined they sound very natural. I install the L.R. Baggs Anthem system almost every week.
Often the installation alone is not enough: for a balanced output, the saddle slot and saddle have to be matched to each other following a special procedure. More under fixing piezo problems.
Guide prices
- Installation (e.g. L.R. Baggs Anthem) approx. CHF 150.–
- Match saddle slot and saddle approx. CHF 60–180.–
- Custom saddle, accurate to 0.02 mm approx. CHF 90–150.– + material




Fixing piezo problems
Single strings too loud or too quiet?
On around a quarter of instruments with an under-saddle piezo, not all strings are equally loud and/or the overall output is only partly used. The cause is almost always the contact: the pressure of the saddle must be distributed evenly under all strings. There is hardly any well-founded know-how on how to achieve this in practice. Through more than 300 hours of my own research and self-developed solutions, tools and jigs, I achieve a success rate of around 95 % even on problematic instruments – often away from common teaching and manufacturer recommendations.
My saddles are levelled to an accuracy of 0.02 mm. Any levelling or re-routing of the saddle slot is done under simulated string tension on the top. My routing jig does not need to be mounted on the body – so the arch of the top is not distorted during the work.
Guide prices
- Fit a pre-made saddle approx. CHF 55.– + material
- Troubleshooting & tests approx. CHF 70–180.–
- Re-rout or rout out the saddle slot approx. CHF 140.–
- Custom saddle for piezo approx. CHF 90–150.– + material




Workshop & custom work
Nut & saddle
Custom-made from bone, Tusq, Corian or Micarta – or a pre-made one fitted at a budget price.
Wrong slots, wear, breaks, an unsuitable design or poor material cost tone and tuning stability. With my own sanding jig I make the nut and saddle to fit your instrument perfectly – with seamless transitions and polished to a high gloss.
As a budget option I fit a pre-made nut – I usually have the common brands in stock. On acoustic guitars with an under-saddle piezo, the saddle must be levelled particularly precisely (see fixing piezo problems).
Materials in stock
- White Bone, Vintage Bone
- White Corian, Black Corian
- White Tusq, Black Tusq
- Vintage Nylon (Gibson style)
- Natural Micarta
Guide prices
- Fit a pre-made saddle approx. CHF 35–50.– + material
- Fit a pre-made nut approx. CHF 50.– + material
- Custom saddle, standard approx. CHF 80.– + material
- Custom nut, standard approx. CHF 120.– + material
- Custom nut, Gibson style approx. CHF 150.– + material
- Custom saddle for under-saddle piezo approx. CHF 140.– + material




Finishing
Own spray booth: refinishes, touch-ups and spot repairs in PU and nitro.
GTM has a professionally equipped spray booth – for complete refinishes as well as small touch-ups and spot repairs. I work with polyurethane and nitrocellulose finishes.
The price depends heavily on the build-up of the finish: some finishes are done in one pass, others need many times that. I am happy to advise you which build-up suits your instrument.
Guide prices
- Single coat approx. CHF 180.– excl. material
- Strip finish from body incl. fine sanding approx. CHF 500.– excl. material
- Finish body (ready for spraying), classic build-up, high gloss approx. CHF 1000.–




Pickguards
1:1 copy or your own design – made to fit from plastic or wood.
You don’t like the colour or design of your pickguard? Ordered replacements often don’t fit because of small differences – and for many models there are none at all.
I copy your pickguard by traditional craftsmanship from the material of your choice, without damaging the original. Design changes are always possible. Possible with all available blanks of plastic or wood (no metal).
Guide prices
- 1:1 copy from approx. CHF 350.–
- Custom design from approx. CHF 450.–




Routing
Battery compartments and modifications to body and pickguard – precise with router and my own router table.
The router is the most versatile and precise tool in guitar making. Used correctly it helps with countless jobs: from a separately accessible battery compartment for active pickups to modifications to body and pickguard. See examples in the routing and router table galleries.
Guide prices
- By effort from approx. CHF 60.–




Modifications & custom work
An idea that doesn’t exist yet? Tell me about it.
I love realising special requests that perhaps nobody has done before or that are outside the daily business. Expect slightly longer waiting times – good solutions take time.
Tell me your vision and I’ll try to make it happen.
Guide prices
- By arrangement Quote




How it works
How a job works
01
Get in touch
Call, send a WhatsApp message or use the form. There are no fixed opening hours – we arrange an appointment that suits you.
02
Assessment & quote
You bring your instrument to Kaiserstuhl or leave it at a drop-off point in Bern or Lucerne. You find out what it needs and what it costs.
03
Work & pick-up
Work only starts once you give the go-ahead. You pick up a checked, set-up instrument that is ready to play.
FAQ
Frequently asked questions
Does the workshop have opening hours?
Flexible appointments instead of fixed opening hours: since I live in the same building, visits outside normal business hours are possible too. You are especially welcome on Mondays and Fridays from 5 pm, when our bar at the GTM Club & Store is open as well. Call, send a WhatsApp message or use the contact form.
Do I have to bring my instrument to Kaiserstuhl?
Not necessarily. Instruments can also be left at drop-off points, and for several guitars at once a courier trip is possible. More under drop-off points.
Is a setup worth it on a new guitar?
Almost always. Around 80 % of newly bought instruments can still be improved massively. The assessment is free of obligation.
What does a guitar service cost?
The standard service including strings and boutique setup costs approx. CHF 95.– (classical guitar) to approx. CHF 140–280.– (electric guitar with Floyd Rose). The prices shown are average guide prices and can vary depending on the instrument and effort.
Do I get a quote beforehand?
Yes – individual quotes, also for insurance cases. The first quarter of an hour is free of obligation; extensive quotes are charged. The analysis of frets and fretboard (approx. CHF 65.–) is credited if you place an order.
Which instruments does GTM service?
Electric, acoustic and classical guitars as well as basses. GTM is also the exclusive service and warranty partner in Switzerland for Yamaha, Hagström, FGN, Rickenbacker, Spector, Cort, Lava Music, Takamine, Lanikai and Kohala.
Where is the workshop?
At Badenerstrasse 129 in 5466 Kaiserstuhl AG – in the picturesque little town on the Rhine, on the border with Germany and the canton of Zurich. The GTM Club & Store is in the same building.
What does your instrument need?
Briefly describe the problem or what you would like. I will get back to you with an initial assessment and a suggested appointment.
By appointment · +41 79 126 37 24

